Build Archive - September
Rear Lockers
12th September 2020
Built rear lockers on both sides. The front frame was bonded and screwed to the ceiling and end wall. A rear support was bonded and screwed to the wall picking up on the supports behind the ply. The front and back were tied together with wood that will act as dividers to stop stuff from moving too much when braking.
The bottom and end were clad in 5mm ply and all painted white. The front had IKEA drawer fronts fitted with a gas strut.
An LED strip was fitted on the underside of both lockers with a controller fitted in the rear of the locker. We are using a WiFi controller for control via a phone and the LEDs also has an IR controller. Beneath the lockers 2 reading lamps were fitted over the wires.
We also had decided on the colour of the walls.
